LEAF won't go into Drive

Requiring the Brake-On to Start is typical, for Safety.

Pressing Start without the Brake goes to Accessory (ACC) mode, right?

garygid said:

Pressing Start without the Brake goes to Accessory (ACC) mode, right?

Click to expand...

The incredibly helpful manual :roll: says the following:

When the power switch is pushed without depressing the brake pedal, the power switch position will change as follows.

• Push once to change to ACC.
• Push two times to change to ON.
• Push three times to change to OFF.
• Push four times to return to ACC.
• Open or close any door to return to LOCK while in the OFF position.

Click to expand...

Don't even ask me how a button moves to different positions. And "On" is different from another state they call "Ready".

ON: This position turns on the EV (Electric Vehicle) system and electrical accessories.
READY: (Normal operating position) This position turns on the EV (Electric Vehicle) system, electrical[/list]

Click to expand...

So... from someone who actually has the Leaf, maybe they can tell us what these actually mean. It sounds to me like if you do not press the brake and then press the power once you are in ACC. If you press it again, you are in "on" (headlights turn on?). Press a third time, and the car turns off again. Do I have it right?