Leaf Motor working on the Bench

My Nissan Leaf Forum

Help Support My Nissan Leaf Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
D

DaveBlack

Member
Joined
Jun 3, 2020
Messages
15
Hi guys and gals,

I am currently converting my already converted EV RX8 to Leaf tech... I have got the motor and original inverter working without needing to buy any external addons. Well except an Arduino to send can commands.

Hopefully will release an easy to use code base so anyone wanting to use Leaf tech in their EV's can do so...

https://youtu.be/GfZ0EMlDrJ4

Cheers

Dave
 
Interesting. Prior to LEAF my daily driver was an RX8. Like you, I wanted a true rotary :lol:
 
Lol, hopefully this is gonna be good fun to drive - I am leaving the gearbox in, first and second gears should be pretty nippy as they are higher ratios than the Leaf is as standard. Third will probably be the go to gear for efficiency and overall driveability.

Dave
 

Similar threads

A
(2018+) TCU Decoding and Emulating
Replies
2
Views
953
aless1616
A
C
2012 LEAF to the Dealer Yesterday for Work
Replies
4
Views
2K
solartim
S
D
Leaf Charger working on the bench
Replies
0
Views
1K
DaveBlack
D
D
30KWH Pack Charge Voltage
Replies
7
Views
4K
LeftieBiker
L
K
2023 Nissan LEAF QC Charger Fault - EV System Error
Replies
14
Views
4K
dhyatt
D

Latest posts

Back
Top