95eagle said:
Here are the trouble codes I got using Leafspy. Did clear them. Shut the car off. Read again with following results.
>C1155 0009 ABS BR FLUID Level Low BRC-111
Ok None ---> AIR BAG
>C1704 0009 BCM Low Pressure FL WT-26
>C1705 0009 BCM Low Pressure FR WT-26
>C1706 0009 BCM Low Pressure RR WT-26
>C1707 0009 BCM Low Pressure RL WT-26
>C1A70 0109 BRAKE Brake Control System BR-160
U1511 0108 BRAKE Pwr Supply Backup Unit Comm BR-184
<span> B29A0 2968 <a href="http://www.amazon.com/s/?field-keywords=electric%20vehicle%20charger&tag=myelecarfor-20" class="interlinkr" target="_blank">charger</a> N/CHG Port Engage Err VC-95</span>
<span> B29C1 236C <a href="http://www.amazon.com/s/?field-keywords=electric%20vehicle%20charger&tag=myelecarfor-20" class="interlinkr" target="_blank">charger</a> EVSE VC-98</span>
Ok None ---> PARKING BRAKE
Ok None ---> EPS
<span> >P3173 00C1 EV/HEV On Board <a href="http://www.amazon.com/s/?field-keywords=electric%20vehicle%20charger&tag=myelecarfor-20" class="interlinkr" target="_blank">charger</a> Sys EVC-236</span>
Ok None ---> HVAC
Ok None ---> HV BATTERY
Ok None ---> IPDM E/R
Ok None ---> METER
Ok None ---> MOTOR CONTROL
U1266 0208 MULTI AV TCU Conn AV-92
Ok None ---> SHIFT
U1A05 0008 TCU USB Comm AV-199
<span>Some of those errors (especially any with comm in description) look like leftovers from 12-volt battery failure. Sometimes it is necessary to clear DTCs, disconnect 12-volt battery, reconnect battery, and clear DTCs in order to really clear the CAN Bus communication errors. Try that befor purchasing an onboard <a href="http://www.amazon.com/s/?field-keywords=electric%20vehicle%20charger&tag=myelecarfor-20" class="interlinkr" target="_blank">charger</a>.</span>