chris1howell
Well-known member
I just finished a batch of 20 boards for lincomatic's Open Source "LeafCAN". http://blog.lincomatic.com/?p=831
I will have boards for sale by the end of the week for $75 with US shipping and LeafCAN firmware loaded. Send a PM if you want one...
Source code: https://github.com/lincomatic/LeafCAN
A basic build is simple and will take about 10-15 minutes. Just solder 4 wires from the OBD cable to the board, solder .1" header pins to the LCD and solder the LCD to the board...
Parts required:
CAN board $75 - PM if you want one
OBD cable $12 http://www.obd2cables.com/products/...s/cable-j1962m-ra-type-b-to-open-end-6ft.html
LCD $4 -10 http://blog.lincomatic.com/?p=809https://www.adafruit.com/products/181
Enclosure $10 https://www.adafruit.com/products/903
Lincomatics 3D printed cases may be avaliable in the near future.
I will have boards for sale by the end of the week for $75 with US shipping and LeafCAN firmware loaded. Send a PM if you want one...
Source code: https://github.com/lincomatic/LeafCAN
A basic build is simple and will take about 10-15 minutes. Just solder 4 wires from the OBD cable to the board, solder .1" header pins to the LCD and solder the LCD to the board...
Parts required:
CAN board $75 - PM if you want one
OBD cable $12 http://www.obd2cables.com/products/...s/cable-j1962m-ra-type-b-to-open-end-6ft.html
LCD $4 -10 http://blog.lincomatic.com/?p=809https://www.adafruit.com/products/181
Enclosure $10 https://www.adafruit.com/products/903
Lincomatics 3D printed cases may be avaliable in the near future.