California Leaf drivers: What plug do you use?

[gascant]

I like to use the molded plugs that come with appliance cords and other pigtails, although they are usually a lot longer than they need to be. I'm also putting together a tool kit to carry around in the car, so that I can make up adapters on the spot if I need them. See below. The kit won't have the appliance cord in it, but rather a molded L6-20 Female so I can buy the Male whatever if/when I need it. The photo is the tool set I use when giving adapter fabrication demos at owners club meetings. I'm adding 10 and 12 mm wrenches to it.

 

[smkettner]

I like to use the molded plugs that come with appliance cords and other pigtails, although they are usually a lot longer than they need to be.

Often the plugs come with more and heavier wire than needed. Such as that 14-50 you have pictured. Better IMO to get the L6-20 with three wire #12 to add the plug connector of choice.

 

[TonyWilliams]

I have two 6-50's in my garage. One for a welder, and one for the Blink. I suspect most garage type welders and 240v air compressors use the 6-50.