wantonsoup
Well-known member
I've got the Schneider EV2430WS 30-amp EVSE ready to be installed. I'm confused about the wiring instructions and I'm hoping someone here is enough of an expert to guide me. 30 amps use 10 gauge wiring, but the installation manual for this EVSE says this:
8 gauge / 40 amp setup. I'm confused. I mean the instructions are straightforward obviously, but why is this a 30-amp EVSE if it's connected with 40-amp wiring and breaker? Can/should I use 30 amp / 10 g? 8 g wire is more expensive which is like another $50-100 for this run.
Second question!
I'm also thinking I should have the electrician install a NEMA outlet and wire a plug to the charger, in case I want/need to move it in the garage down the road. What plug is recommended? All I see are 30 and 50 amp ones.
8 gauge / 40 amp setup. I'm confused. I mean the instructions are straightforward obviously, but why is this a 30-amp EVSE if it's connected with 40-amp wiring and breaker? Can/should I use 30 amp / 10 g? 8 g wire is more expensive which is like another $50-100 for this run.
Second question!
I'm also thinking I should have the electrician install a NEMA outlet and wire a plug to the charger, in case I want/need to move it in the garage down the road. What plug is recommended? All I see are 30 and 50 amp ones.