chris1howell
Well-known member
Its pretty small, the board is 36mm (1.4") x 75mm (2.9") and stacks very close to a standard 16x2 LCD. Its the exact same length and width of the LCD board and should add only 1/4" to the depth of the LCD.
http://www.adafruit.com/products/181
http://www.adafruit.com/datasheets/TC1602A-01T.pdf
ODB wires can be soldered to to board adding no more to the depth or a RJ45 jack can be added for a removable cable (which would add some depth).
http://www.adafruit.com/products/181
http://www.adafruit.com/datasheets/TC1602A-01T.pdf
ODB wires can be soldered to to board adding no more to the depth or a RJ45 jack can be added for a removable cable (which would add some depth).