garygid
Well-known member
I am waiting for some feedback from user tests before I post the firmware.
I will email the hex F1.10 file to you to program (flash) and try (if you can).
However, I will come prepared to flash GID-Meters this Coming Saturday.
I know some things that I still want to add (in a following version):
1. Show the voltage for the 12v battery, if possible.
2. Change the initial brightness to favor the original display.
3. Display not-available values as -.- rather than 0.0 (zero) value.
4. Log ALL the selected bus's CAN messages.
I will email the hex F1.10 file to you to program (flash) and try (if you can).
However, I will come prepared to flash GID-Meters this Coming Saturday.
I know some things that I still want to add (in a following version):
1. Show the voltage for the 12v battery, if possible.
2. Change the initial brightness to favor the original display.
3. Display not-available values as -.- rather than 0.0 (zero) value.
4. Log ALL the selected bus's CAN messages.