Replace J1772 connector

Hello,

I broke my J1772 connector on the charger (http://imgur.com/a/RptqK)

I have Siemens VC30GRYU Versicharge 30-Amp.

As I understand, I need either get cable and connect combo or just a connector. I didn't take it apart yet to understand what would it take to do so.

Any advice is welcomed

Thank you,
Eugene

We have repaired a number of these.

$199 Iwill put a new cable and plug on it.

sales (((@))) QuickChargePower.com

If you're a DIY'er, you can get replacement cable here: https://store.openevse.com/collections/frontpage/products/j1772-cable-40a-ultra-flexible-us-only

or here: https://emotorwerks.com/store-juicebox-ev-charging-stations/1631-juiceplug-a-universal-smart-ev-charging-adapter/category_pathway-23

or here: https://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Dtools&field-keywords=j1772+cable

The prices seemed to have risen since I bought them a few years ago though.

Also, if you've only broken the latch, you can actually remove it without rendering the connector unusable.


*NOTE: VERY IMPORTANT!!*

If you're NOT a DIY'er, then see TonyWilliam's posting above for help. I don't know your technical capabilities, so can make zero assurances of your safety. I only offer up the suggestions above, because I've done it before and got it to work.

Good Luck!

Just saw your picture. Not sure how you managed to mangle out the pins like that, Please ask for TonyWilliam's help. Cheers!

Thanks guys for the replies. It was pulled hard while it was plugged into the car. I am lucky that inlet seems to be not damaged at all.