key5000
Member
Hello Everyone,
Over the weekend, I have installed DRL for my 2015 SV, the cost is less than $10.
I know, there are DRL topics out there but the wiring instruction does not work on some.
Below is instruction on how to install it and where to get the parts:
- Buy DRL LED from eBay for $6 ; sorry, I do not know how to create hyper-link (http://www.ebay.com/itm/2x-Super-Bright-White-Car-COB-LED-Lights-DRL-Fog-Driving-Lamp-Waterproof-DC-12V-/291161780706?hash=item43ca9831e2:g:SK8AAOSwu4BVvxIG&vxp=mtr)
- Buy Quick Splice Electrical Connector from local auto part or Amazon
= Drill 4 small holes at the front bumper (black part, see picture below)
= Stick the DRL LED to the bumper using double side tape included in the LED
= Using small cable ties to secure it by those 4 holes
= Drill another hole so the wire from LED can go through it.
= Now, open the EDM box (locate on the right side next to battery) and turn it over, locate purple/white wire and tap the red wire (+)from LED to it using quick splice. (do not use the one from 3 wire plug) See picture below for detail.
= Locate black/white wire and tap the black wire (-) from LED to it using quick splice
==> installation is now completed.
Here is the DRL LED activity:
1- Engine ON, ==> DRL=ON
2- Engine OFF, ==> DRL=OFF
3- Charging ON, ==> DRL=OFF
4- Charging OFF, ==> DRL=OFF
Note, you can buy any LED light from eBay to replace LED from above, if you like (I had another one for my 2015 S model too)
Here are the pictures:
Over the weekend, I have installed DRL for my 2015 SV, the cost is less than $10.
I know, there are DRL topics out there but the wiring instruction does not work on some.
Below is instruction on how to install it and where to get the parts:
- Buy DRL LED from eBay for $6 ; sorry, I do not know how to create hyper-link (http://www.ebay.com/itm/2x-Super-Bright-White-Car-COB-LED-Lights-DRL-Fog-Driving-Lamp-Waterproof-DC-12V-/291161780706?hash=item43ca9831e2:g:SK8AAOSwu4BVvxIG&vxp=mtr)
- Buy Quick Splice Electrical Connector from local auto part or Amazon
= Drill 4 small holes at the front bumper (black part, see picture below)
= Stick the DRL LED to the bumper using double side tape included in the LED
= Using small cable ties to secure it by those 4 holes
= Drill another hole so the wire from LED can go through it.
= Now, open the EDM box (locate on the right side next to battery) and turn it over, locate purple/white wire and tap the red wire (+)from LED to it using quick splice. (do not use the one from 3 wire plug) See picture below for detail.
= Locate black/white wire and tap the black wire (-) from LED to it using quick splice
==> installation is now completed.
Here is the DRL LED activity:
1- Engine ON, ==> DRL=ON
2- Engine OFF, ==> DRL=OFF
3- Charging ON, ==> DRL=OFF
4- Charging OFF, ==> DRL=OFF
Note, you can buy any LED light from eBay to replace LED from above, if you like (I had another one for my 2015 S model too)
Here are the pictures:
![](https://proxy.imagearchive.com/578/578f70e58d870555faab343bfbc872c7.jpg)
![](https://proxy.imagearchive.com/caa/caa57b583b562e9248a5e715655c783b.jpg)
![](https://proxy.imagearchive.com/895/895134292c1a62ccd61b1e541df77370.jpg)
![](https://proxy.imagearchive.com/acf/acf0b8272449bda711d884360f8e50e8.jpg)