IskeSoderlund
New member
- Joined
- Apr 3, 2018
- Messages
- 4
Hi!
I have been on the forum for a while and I have found some CAN captures of charging that has helped me quite a way to controlling a leaf on board charger.
Now I just need to find the so called "max chargeable power" both on the charger and on the BMS. To be certain what is what I think I need a EV-can capture from about 80% to 100% when the charger turns off. Both so that I can see which values correlate and what messages the BMS sends to the VCM when it's fully charged and it should stop charging.
So I'm wondering if anyone that has a leaf from 2014-2016 would be willing to make an EV-can capture from charging either from 0-100% or just from around 80-100%. It would help me a ton!!!
PS: or if someone has seen a capture on the forum and would like to point me in the direction
I have been on the forum for a while and I have found some CAN captures of charging that has helped me quite a way to controlling a leaf on board charger.
Now I just need to find the so called "max chargeable power" both on the charger and on the BMS. To be certain what is what I think I need a EV-can capture from about 80% to 100% when the charger turns off. Both so that I can see which values correlate and what messages the BMS sends to the VCM when it's fully charged and it should stop charging.
So I'm wondering if anyone that has a leaf from 2014-2016 would be willing to make an EV-can capture from charging either from 0-100% or just from around 80-100%. It would help me a ton!!!
PS: or if someone has seen a capture on the forum and would like to point me in the direction