Hi,
I have been using Schneider Electric EV230WS L2 charger for my 2011 Nissan Leaf. Few days ago as I changed position of charging my car to outside of garage, seemed to have pulled the charging cable. Now, when I connect the cable to charge, it just beeps once and doesn't start charging. I opened up the cover of charger ev230ws and see that two wires from the J1772 adapter cable are not connected to matching wire of the ev230ws. These are green and orange (orange plus blue from adapter side). I attached a picture to show. Shows the open connectors.
https://1drv.ms/u/s!AlU5q8_Ka5d2mikmQ2YUrk72E1AP
Do I just connect these cables to matching of ev230ws and should solve the problem? I had a bad experience of childhood with electric connections, so looking for guidance.
I have been using Schneider Electric EV230WS L2 charger for my 2011 Nissan Leaf. Few days ago as I changed position of charging my car to outside of garage, seemed to have pulled the charging cable. Now, when I connect the cable to charge, it just beeps once and doesn't start charging. I opened up the cover of charger ev230ws and see that two wires from the J1772 adapter cable are not connected to matching wire of the ev230ws. These are green and orange (orange plus blue from adapter side). I attached a picture to show. Shows the open connectors.
https://1drv.ms/u/s!AlU5q8_Ka5d2mikmQ2YUrk72E1AP
Do I just connect these cables to matching of ev230ws and should solve the problem? I had a bad experience of childhood with electric connections, so looking for guidance.