I did not take photos of it- sorry. If you follow the cable for the hood release, the spare grommet is literally 1" to the left (towards the outside of the car)
If you look in the engine compartment, you can see it- look behind the battery and as far back in the lower driver corner as possible...
Outstanding! PIN #85 looks like a winner.
Now where do I find this AV Control Unit plug- coming out of the head unit?
Or maybe I pull the output off the antenna amp itself?
Any ideas on what might be easier access?
Thanks for the idea. The beauty of the ADS amp is the high impedance input stage so that it does not need a LOC but can take straight speaker level inputs. So all I need is a 12v remote turn-on wire to complete this.
Anyone else have knowledge of a 12v stereo turn-on before I start poking around?
I installed a new stereo system in my 2013 Leaf and the amplifier needs a 12v turn-on wire. Does anyone know if the non-Bose system has an output wire that goes to 12v when the stereo is turned on?
Thanks!!!
I just installed a new system in my 2013 Leaf and my amp (20th Anniversary A/D/S P640.2) needs a 12v remote turn-on wire. Did you use one for your amps and if so, where did you find it?
Thanks!!!
This post and pics were great in upgrading my 2013 Leaf. I wanted to add a couple things I found for others who may be looking at this and want different options.
1) Regarding pic #1-5 and using the unused grommet. There is also an unused grommet on the driver side, to the left of the parking...