why? other than platitudes like "don't do something that can cause injury" i have seen no valid criticism to the configuration.
why would i burn down my house?
and i never said that they can do. it requires following all electrical common sense precautions and using the diagram i provided...
I agree there is confusion. Nobody has pointed out what is the actual diagram that is any different from the diagram I have provided. Essentially this is connecting 3 wires to 4 connecting points properly. It's not rocket science. The rest is using the right gauge wires and properly insulating...
OK i agree. but there is only so many ways you can wire this and i followed the diagram for EV. And it works. So I don't know why everybody makes it out to be such a complex thing. There are 3 wires only to be connected to 4 other connecting points on the other adapter configuration. There is...
Well I don't know why I would be wrong. I just made myself an adapter and it works perfectly well.
Here is the wiring diagram
https://getgoplug.com/cdn/shop/products/120VAdapterWiringDiagram_grande.png?v=1637956145
Here is a photo of the adapter I made:
Tested and works fine.
A lot of untruths...
as far as i know there is not much difference between a dryer type nema 6-50P and a 14-50R other than the latter has 2 grounds and the former 1 ground and latter is 240v and former is 120v. AFAIK there is nothing special about an EV vs other type of adapter for this that I know of. Correct me if...
because i could never get leafspy and dongles i bought to work. later i figured out just buying a generic elm327 is not good enough. will try to get new approved one and do
I've seen some selling on ebay that support bothand the level1 is actually just an adapter to plug into a regular wall outlet.
I am wondering if the original one that comes with the leaf one can plug into 120v (with adapter) and will it work?
Below he is plugging in the adapter for 120v charging.
no warning lights nothing at all. just when it blows it blows cold air. also as far as I recall it thinks it's using power as it lowered the expected range.
I have purchased 3 so far. 2 bluetooth ones and one WIFI one.
One off ebay and one off aliexpress (see below pic). WIFI one off aliexpress.
None of them work with Leafspy.
I get error on the bottom of Leafspy saying
Bts read failed (see below screenshot)
The WIFI seems to start connection and...