Hi,
I recently bought a 2012 leaf with no heat but driving.
Previous owner replaced heater at workshop but not the fuse in DCDC junction box.
So I followed the tutorials on YouTube for replacing the PTC fuse and found the fuse as expected to be blown.
After putting all back together I got P3176 and P311c and car won't go into Ready mod e.
I see many threads saying cause for these codes are pre charge resistor in HV battery JB. But for me this don't feel likely after the work I have done.
I'm leaning towards human error from my side by failing to connect something in or around DCDC junction box or can i somehow have made damage to the inverter capacitor?
I'm starting to lack ideas on how to proceed with this, and would like to narrow down the possible causes before removing/ replacing DCDC junction box or pre charge resistor.
Any ideas?
I recently bought a 2012 leaf with no heat but driving.
Previous owner replaced heater at workshop but not the fuse in DCDC junction box.
So I followed the tutorials on YouTube for replacing the PTC fuse and found the fuse as expected to be blown.
After putting all back together I got P3176 and P311c and car won't go into Ready mod e.
I see many threads saying cause for these codes are pre charge resistor in HV battery JB. But for me this don't feel likely after the work I have done.
I'm leaning towards human error from my side by failing to connect something in or around DCDC junction box or can i somehow have made damage to the inverter capacitor?
I'm starting to lack ideas on how to proceed with this, and would like to narrow down the possible causes before removing/ replacing DCDC junction box or pre charge resistor.
Any ideas?