32A OpenEVSE for Sale
This EVSE consists of an OpenEVSE DIY ver 2 board, a 12V supply, a 30A relay (used at 40A in Tesla EVSEs), a blue display, and current & GFCI coils. It is mounted in a off white plastic box with a plywood mounting plate. The input cable is a 4 ft 40A Range cable with a 14-50 plug. The output cable is an unused Yazaki 15ft cable with #10 wire. It is marked 30A but it works fine at the 40A breaker max of 32A.
This is intended to be used with a 40A breaker. It should be connected to a 14-50R using #8 wire. An EVSE is considered a continuous load so 32A is the max for a 40A breaker.
This is programmed with D3.3.0 with the AMP display enabled.
This is sold ASIS but I guarantee it will work upon receipt. The cost is $350 plus $25 for UPS Ground CONUS shipping. Local pickup in Anaheim near Disneyland is available.
Payment is cash for local pickup or Paypal if I ship the unit.
This EVSE consists of an OpenEVSE DIY ver 2 board, a 12V supply, a 30A relay (used at 40A in Tesla EVSEs), a blue display, and current & GFCI coils. It is mounted in a off white plastic box with a plywood mounting plate. The input cable is a 4 ft 40A Range cable with a 14-50 plug. The output cable is an unused Yazaki 15ft cable with #10 wire. It is marked 30A but it works fine at the 40A breaker max of 32A.
This is intended to be used with a 40A breaker. It should be connected to a 14-50R using #8 wire. An EVSE is considered a continuous load so 32A is the max for a 40A breaker.
This is programmed with D3.3.0 with the AMP display enabled.
This is sold ASIS but I guarantee it will work upon receipt. The cost is $350 plus $25 for UPS Ground CONUS shipping. Local pickup in Anaheim near Disneyland is available.
Payment is cash for local pickup or Paypal if I ship the unit.