I don't have a newer Leaf with the CAN connected VSP and I am hesitant to debug on my neighbor's 2016 Leaf (they also seem to be out this weekend and I left my mouse in their Leaf when collecting data last week). However, I do have a 2013 VSP board and just wired it up to an ELM so I can play with the just the board. One short coming is I don't know the required CAN messages to get it to generate the backup sound (seems to need more than just CAN message 0x421 with reverse code active). But other than that it seem to work OK from a CAN viewpoint.
There seem to be seven sounds that can be controlled (values go up to 7). Don't know what if anything the three additional codes control.
I now feel I have enough information from the VSP board to add VSP control into a test version of LeafSpy Pro and those with 2013+ Leafs can see if it works and what the extra codes do.
There seem to be seven sounds that can be controlled (values go up to 7). Don't know what if anything the three additional codes control.
I now feel I have enough information from the VSP board to add VSP control into a test version of LeafSpy Pro and those with 2013+ Leafs can see if it works and what the extra codes do.