evanmuirow
New member
- Joined
- Jan 15, 2021
- Messages
- 1
My EVSE got done water inside it during a big wind/rain storm. It was tripping the gfci where I plug it in before I realized this problem. I took the cord caps off the Evse and about half a cup of water came out. Stopped tripping the gfci, buy displayed a fault. I removed the screw caps and the security torx screws and took off the cover, used a blow dryer to dry out the inside of the Evse. Still showing fault. Multimeter indicates good current through the incoming and outgoing wires of the EVSE. Any suggestions why is still faulting, and how to get it working? Any advice is much appreciated, thanks