archuser
Member
I made the second version of the air deflectors today.....lower & stiffer than the first take. The rubber is from Amazon 1/8 thick X 4in--so the part is over 50% more area. The bracket at the outer edge uses a stock bumper to underpan bolt. The aluminum is an L-angle bent to the contour & the rubber is glued to it. I did need to use a couple of pop-rivets....but I tried to hide them as much as possible. Will be getting the 62KWh air dam shortly.
![IMG_20240523_161333.jpg IMG_20240523_161333.jpg](https://cdn.imagearchive.com/mynissanleaf/data/attachments/3/3669-ec5c842eb8cd88aa4d369d260beadd7f.jpg)
![IMG_20240523_161349.jpg IMG_20240523_161349.jpg](https://cdn.imagearchive.com/mynissanleaf/data/attachments/3/3670-56510a5062a5c06518e1b4665bcaf472.jpg)
![air deflector #2.png air deflector #2.png](https://cdn.imagearchive.com/mynissanleaf/data/attachments/3/3668-fe556bc3b63390fdef9b1ffb5ab91a1c.jpg)
![IMG_20240523_161333.jpg IMG_20240523_161333.jpg](https://cdn.imagearchive.com/mynissanleaf/data/attachments/3/3669-ec5c842eb8cd88aa4d369d260beadd7f.jpg)
![IMG_20240523_161349.jpg IMG_20240523_161349.jpg](https://cdn.imagearchive.com/mynissanleaf/data/attachments/3/3670-56510a5062a5c06518e1b4665bcaf472.jpg)
![air deflector #2.png air deflector #2.png](https://cdn.imagearchive.com/mynissanleaf/data/attachments/3/3668-fe556bc3b63390fdef9b1ffb5ab91a1c.jpg)
Last edited: