FLBoy
Member
asinclair said:When looking at the plug connector, the wires to be tapped are on the right-hand side (looking at the pins) with the connector snap-in on top, correct?
I'm not Ramius, but maybe I can help. It appears to me that you are looking at the pins on the front side of the connector, when you should be looking at the wiring harness (back) side of the connector.
Note that near the middle of his description Ramius stated "With the connector facing away from you and the connector right side up and looking at the wires, you are going to remove both the right side upper and lower wires, which are red and black, terminals 59 and 60." (Emphasis mine.)
Also note that in Ramius' last graphic showing the connector along with the entire system diagram, the connector is labeled "M84 Connector Harness Side."
Perhaps Ramius will confirm whether or not my interpretation of this is correct.