OpenEVSE EVSE for sale. This unit is loaded with version 1.08 firmware. The shield button is enabled. It is constructed in a large Adafruit water resistant case. It consists of an Arduino Uno, OpenEVSE shield, Adafruit RGB shield, L1, L2. stuck relay sense board, 30A relay, 12V opwer supply, fuses, and a n ITT 30A 240V J1772 cable with 10 guage 600V cable.
This unit may be used with 120V-240V. It auto senses the voltage. I used it at work at 208V. I replaced it with the same unit except the OpenEVSE shield was built on a proto shield board.
I am selling this for $365 with a P6-20P plug. If you want bare wires to add your own plug its $350. If you want a L6-20P locking plug its $375. I will ship the unit only without any of the woodden mounts in a large Priority Mail box for $20. Local pickup in Anaheim is available and you can have any or all of the wood.
As with any electronic item this is sold ASIS but I will repair any failures within 30 days of shipment or pickup.
This unit may be used with 120V-240V. It auto senses the voltage. I used it at work at 208V. I replaced it with the same unit except the OpenEVSE shield was built on a proto shield board.
I am selling this for $365 with a P6-20P plug. If you want bare wires to add your own plug its $350. If you want a L6-20P locking plug its $375. I will ship the unit only without any of the woodden mounts in a large Priority Mail box for $20. Local pickup in Anaheim is available and you can have any or all of the wood.
As with any electronic item this is sold ASIS but I will repair any failures within 30 days of shipment or pickup.