Agkirk
Well-known member
- Joined
- Mar 26, 2015
- Messages
- 61
The wiring to my Charge Door solenoid has been damaged by a rabbit and I need to remove the solenoid with its plastic shroud.
It does not appear to be an easy task!
Does anyone have any documents/drawings from a service manual regarding this repair that could be shared? I have been able to remove two sheet metal screws and a 10mm bolt from the shroud but the assembly has not be freed up. There appear to be 3-4 pop rivets holding the assembly in place but no way to access them without removing the front bumper.
Any guidance would be appreciated as I've been at this for several days/weeks. :roll:
It does not appear to be an easy task!
Does anyone have any documents/drawings from a service manual regarding this repair that could be shared? I have been able to remove two sheet metal screws and a 10mm bolt from the shroud but the assembly has not be freed up. There appear to be 3-4 pop rivets holding the assembly in place but no way to access them without removing the front bumper.
Any guidance would be appreciated as I've been at this for several days/weeks. :roll: