eBIMMER
Posts: 7
Joined: Sat Jun 06, 2020 2:14 pm
Delivery Date: 06 Jun 2020

Water Pump Wire Pinouts for 2012 Leaf

Sun Nov 01, 2020 7:08 pm

Hello!

Does anyone know what signals are required to run one of the 12 water pumps in a 1st gen Leaf?

There are 3 pumps in the vehicle and each has 4 wires. I measure one of the wires as being about 13V (slightly higher than battery actually). Other wires when measured with a DC multimeter showed fluctuating voltages between 0v and 10v. Could be digital signals, AC current, or who knows what elese. Lacking an oscilloscope im hoping somebody has the answer.

I'm trying to wire up the PTC pump so I can operate it with a switch in my EV conversion which is the 2012 Leaf in a 1986 BMW 325 e30. Hijacking the resistance heater functionality will be next :)

Thanks!

arnis
Posts: 1027
Joined: Sat Jan 23, 2016 3:21 pm
Delivery Date: 23 Jul 2014
Leaf Number: 015896
Location: Estonia, Europe

Re: Water Pump Wire Pinouts for 2012 Leaf

Sun Nov 15, 2020 6:10 am

If I remember correctly... It was controlled with PWM duty cycle signal.
Short range EVs <30kWh -- Medium range: 30-60kWh -- Long range: >60kWh
Charging: Trickle <3kW -- Normal 3-22kW -- Fast 50-100kW -- Supercharging >100kW

MannyTx
Forum Supporter
Posts: 1
Joined: Sat Jan 16, 2021 3:18 am
Delivery Date: 16 Jan 2017

Re: Water Pump Wire Pinouts for 2012 Leaf

Sat Jan 16, 2021 8:47 pm

Is there a technical reason to use the leaf water pumps versus an off the shelf 12v water pump off Amazon? Curious because I am doing an ev conversion as well. Will this be used to cool down the charger?

eBIMMER
Posts: 7
Joined: Sat Jun 06, 2020 2:14 pm
Delivery Date: 06 Jun 2020

Re: Water Pump Wire Pinouts for 2012 Leaf

Wed Jan 20, 2021 10:48 pm

I wanted to use the Nissan pump for cabin heat to circulate the fluid thru the heater core. I already have the stock pump so I thought I'd try to use that.

Yes, in many ways it would be easier to buy a pump off the shelf.

My motor cooling pumps are the stock Nissan pumps. The can system runs those si I never had to mess with those, they just worked.

Mo at ev-olution recently posted code to turn on the heater pump via arduino, so I'm going to try this route with the Leaf pump soon.

User avatar
Dala
Forum Supporter
Posts: 287
Joined: Sun Oct 28, 2018 11:24 am
Delivery Date: 01 Jan 2015
Leaf Number: 316851
Location: Finland
Contact: Website

Re: Water Pump Wire Pinouts for 2012 Leaf

Thu Jan 21, 2021 1:42 am

I have it here:
Image

Please note that it takes 10s for pump to start!

Return to “Engineering”