On my 2019 Leaf, I'm monitoring the DLC connector near the steering wheel, pins 6 & 14, trying to see the primary CAN bus data. Using an oscilloscope, I'm not seeing any data at all on either line, they're both sitting at the recessive voltage of about 2.5.
Everything I've read suggests there should be bits flying out of that connector, but for me they're just flat. If I plug in my LeLINK ODB adapter, LeafSpy is able to read all the usual stuff.
I'm thinking I'm doing something really wrong here - anybody seen this before? Wondering if I've badly misunderstood the nature of that bus.
Everything I've read suggests there should be bits flying out of that connector, but for me they're just flat. If I plug in my LeLINK ODB adapter, LeafSpy is able to read all the usual stuff.
I'm thinking I'm doing something really wrong here - anybody seen this before? Wondering if I've badly misunderstood the nature of that bus.