Hi all,
I am new to this forum. If I am posting in the wrong topic then please direct me to the correct topic. Thank you in advance.
LeafSpy Pro android. Ver 0.53.182 2018-0E2*0
A possible bug (or operator error)
I have Settings - Units Feet, mile, mph selected. I notice on screen-1 the 'odo=22,819 mi' is not matching miles on my 2018 leaf. When I change Settings to Meters, km, km/h then 'odo=36724 km' then the mileage match the miles on my Leaf but the unit is not correct. It appears that the underlying code is is displaying the mileage opposite of the selected setting. Temperature 'F' and tire pressure 'PSI' are shown correctly.
Is anyone else with same version experiencing the same problem with mileage?
Is there a setting I am missing or is it a bug in the code?
A question about screen-1 and the red/blue bars.
I have a 40kwh battery. The main screen reports 12 0f 12 bars. I am not the original owner and this is my first use of LeafSpy.
I have a screenshot of screen-1 that I can post (minus the VIN) that shows the bars in alternating red-blue-red-blue... from 1-96. All the bars mostly the same height min/avg/max (3.797 3.887 3.901 (104mv). Bar 75 is red and shorter than all the rest at 3.797.
Does this mean that cell 75 is bad, going bad or just weaker than the rest?
Is 3.797 with an average of 3.887 typical or should all the bars be more equal?
Thank you,
I am new to this forum. If I am posting in the wrong topic then please direct me to the correct topic. Thank you in advance.
LeafSpy Pro android. Ver 0.53.182 2018-0E2*0
A possible bug (or operator error)
I have Settings - Units Feet, mile, mph selected. I notice on screen-1 the 'odo=22,819 mi' is not matching miles on my 2018 leaf. When I change Settings to Meters, km, km/h then 'odo=36724 km' then the mileage match the miles on my Leaf but the unit is not correct. It appears that the underlying code is is displaying the mileage opposite of the selected setting. Temperature 'F' and tire pressure 'PSI' are shown correctly.
Is anyone else with same version experiencing the same problem with mileage?
Is there a setting I am missing or is it a bug in the code?
A question about screen-1 and the red/blue bars.
I have a 40kwh battery. The main screen reports 12 0f 12 bars. I am not the original owner and this is my first use of LeafSpy.
I have a screenshot of screen-1 that I can post (minus the VIN) that shows the bars in alternating red-blue-red-blue... from 1-96. All the bars mostly the same height min/avg/max (3.797 3.887 3.901 (104mv). Bar 75 is red and shorter than all the rest at 3.797.
Does this mean that cell 75 is bad, going bad or just weaker than the rest?
Is 3.797 with an average of 3.887 typical or should all the bars be more equal?
Thank you,