Can a couple of you measure the dimensions of your wall that is being used by the Blink units as installed. I realize I had to agree to a minimum of 4'x2' being available but I would like to place a mounting board over the siding before the installation is done next week. My thought is 56" tall by 27" wide. This is based on Wall Mount of 22" high, 8" space and Cord Mount diameter of 18" plus 4" on all sides. My available width is 27" so I am filling that - in case some of you want to point out that the math doesn't work in that dimension. The installation manual suggests placing the display at 60" off the ground, but to me that seems too low. How high off the ground is the centerline of your display? That will help me place the board on the wall as I'm guessing the display centerline is about 8" from the top of the Wall Mount unit.
If any of you have done a similiar installation outside and can post a picture, that would be appreciated. Thanks