knightmb said:SageBrush said:Thanks Dala.
You have me wishing that 40 kWh packs were available
I've found out recently (in my area which is Nissan HQ) that it is possible to order 40 kWh packs locally and just get them in raw form, as-is condition, new. But they cost was around $11k for the 40 kWh pack, so probably not cost effective versus looking for a salvage.
goldbrick said:I agree that $11k for a 40kWh pack isn't unreasonable. The 'as-is' part does give me pause since it implies no warranty. That may not be a problem but it could also be an outlet for Nissan to sell batteries that they don't want to put into cars for whatever reason.
DaveinOlyWA said:knightmb said:SageBrush said:Thanks Dala.
You have me wishing that 40 kWh packs were available
I've found out recently (in my area which is Nissan HQ) that it is possible to order 40 kWh packs locally and just get them in raw form, as-is condition, new. But they cost was around $11k for the 40 kWh pack, so probably not cost effective versus looking for a salvage.
What about 62's?
8675309 said:
@Dala
Does the Battery pairing to VCM in LSP support ZE1 models? Say if VCM is swapped or 40-62kWh
altruistica said:Yes Dala,
Many thanks for a terrific informative film. I can't understand why Nissan main dealers are not offering this kind of service to original Leaf buyers and saving thousands of cars from any early grave.
Dala said:My take on the battery upgrades are now 100% open source! Video with more info:
https://youtu.be/zRk_W0O-WUU
And link to Github: https://github.com/dalathegreat/Nissan-LEAF-Battery-Upgrade
shuma89 said:does it mean that i can install this 2 port can bridge on my car? 2012 year with 40 kwh battery, nothing was changed in battery, I changed only the battery modules, not BMS or anything else.
Dala said:shuma89 said:does it mean that i can install this 2 port can bridge on my car? 2012 year with 40 kwh battery, nothing was changed in battery, I changed only the battery modules, not BMS or anything else.
Nope! This software is only for doing CLEAN OEM direct pack upgrades. Not cell bruteforce swaps.
MikeinPA said:Question regarding paring the LBC to the VCM: if I change out the VCM, but not the traction battery, will the same P3102 code appear? And is this cleared in the same way as if the P3102 was from a battery swap? Is the update resident on the VCM (99% sure this is a yes)?
Enter your email address to join: