Files and instructions can be found here on github! https://github.com/dalathegreat/Nissan- ... ry-to-OBD2
Here's a picture of my rough prototype in use
Hope this is useful to someone!
-
Dala
- Forum Supporter
- Posts: 286
- Joined: Sun Oct 28, 2018 11:24 am
- Delivery Date: 01 Jan 2015
- Leaf Number: 316851
- Location: Finland
- Contact: Website
DIY 3d-printed 'Battery-to-OBD2' cable
Hey, just got done with the final tweaks on my take on connecting a Nissan Leaf battery to OBD2 whilst not connected to a car
Files and instructions can be found here on github! https://github.com/dalathegreat/Nissan- ... ry-to-OBD2
Here's a picture of my rough prototype in use
Hope this is useful to someone!
Files and instructions can be found here on github! https://github.com/dalathegreat/Nissan- ... ry-to-OBD2
Here's a picture of my rough prototype in use
Hope this is useful to someone!
-
nlspace
- Posts: 270
- Joined: Mon Jun 05, 2017 10:21 pm
- Delivery Date: 06 Jun 2017
Re: DIY 3d-printed 'Battery-to-OBD2' cable
dala you are great! This is excellent work Daniel, and very useful information. Thanks for sharing the results of your hard work.