Having a charging issue with L1. EVSE says charging, 240VAC inside the PDM. Just no output power.
Looking into CAN logs I see two fairly important values being reported. Can anyone shed some light on any of these?
1. 0x5BC - LB_Power_Output_Power_Limit_Reason = "Capacity Drop"
2. 0x1DB - LB_MainRelayOn_flag = "No-Permission"
3. I do get a DTC code U100A when plugging in the charger.
4. When J1772 plugged in, I always have a large draw 300-800W on the battery even though HV battery temp is above 0degreesC. As reported by Leafspy. Maybe the LBC uses a different temperature sensor and the HV battery is actually below -20C? I think is odd.
5. Yes the 12V battery has been load tested and is good.
More info here:
https://mynissanleaf.com/viewtopic.php?p=629427#p629427
Can Log of unsuccessful charging here:
https://cloud.collectivetech.ca/s/FkbMcyMAffBeXct/download
Can log of successful charging here:
https://cloud.collectivetech.ca/s/DjgdsQGy2SwM67y/download
Looking into CAN logs I see two fairly important values being reported. Can anyone shed some light on any of these?
1. 0x5BC - LB_Power_Output_Power_Limit_Reason = "Capacity Drop"
2. 0x1DB - LB_MainRelayOn_flag = "No-Permission"
3. I do get a DTC code U100A when plugging in the charger.
4. When J1772 plugged in, I always have a large draw 300-800W on the battery even though HV battery temp is above 0degreesC. As reported by Leafspy. Maybe the LBC uses a different temperature sensor and the HV battery is actually below -20C? I think is odd.
5. Yes the 12V battery has been load tested and is good.
More info here:
https://mynissanleaf.com/viewtopic.php?p=629427#p629427
Can Log of unsuccessful charging here:
https://cloud.collectivetech.ca/s/FkbMcyMAffBeXct/download
Can log of successful charging here:
https://cloud.collectivetech.ca/s/DjgdsQGy2SwM67y/download