garygid
Well-known member
We are using 3D printing for enclosures for some mini CAN
monitors, for the CANary enclosure, and now for plugs to use
for testing our Fairly Fast (DC) Charger experiments.
I have been reading about 3D printers this last week, and I
found the Pirate3D Buccaneer on http://www.Kickstarter.com" onclick="window.open(this.href);return false;
and I also found the Kossel Pro Delta 3D Printer there.
I would like to buy or build a good reliable 3D printer,
but try to keep the price down. If you have experience,
suggestions (avoid or get), or any personal wisdom to share
with us, please do so.
Thanks, Gary
monitors, for the CANary enclosure, and now for plugs to use
for testing our Fairly Fast (DC) Charger experiments.
I have been reading about 3D printers this last week, and I
found the Pirate3D Buccaneer on http://www.Kickstarter.com" onclick="window.open(this.href);return false;
and I also found the Kossel Pro Delta 3D Printer there.
I would like to buy or build a good reliable 3D printer,
but try to keep the price down. If you have experience,
suggestions (avoid or get), or any personal wisdom to share
with us, please do so.
Thanks, Gary