link does not workIs F23 #25 Yellow/Black stripe ?
i don't know anything about posting google spread sheets directly, i think you can put the link to click to see it.
thanksThat's a good catch! May be what is causing your faults.
thanks
what do I do?
That's a good catch! May be what is causing your faults.
But this is strange because the Interlock is shown on the wiring diagrams, linked here FSM Wiring Diagrams in post 97
two wires are different colors.So both PDMs have the same internal wiring from F23 to the CN100, even though one has Fast Charge and the other doesn't?
Quick Charge Port Temperature Sensor, See DTC B2980 for how to test the sensor.what does QCPTMP stand for?
I don't think the sensor is broke, I think the PDM sees the wrong two wires and get a signal that is not from the sensor.Quick Charge Port Temperature Sensor, See DTC B2980 for how to test the sensor.
Yes that is interesting--what is sent to the control board on the two wires in the PDM that doesn't have a QC Chademo Port? The use of different color wiring may be a clue to this.I think the PDM sees the wrong two wires and get a signal that is not from the sensor.
B&R Salvage Tucson...don't know history.There is no good way to test a used electronics control unit other than put it in and it works.
Do you know the history of the PDM, was it from a salvage yard or some random seller?
Need to simulate the sensor....since I don't have a Quick Charge Port installed.Quick Charge Port Temperature Sensor, See DTC B2980 for how to test the sensor.
Enter your email address to join: