It isn't bad. There are 3 mounts each has an M6(10mm head) bolt. First remove the rear portion of the light(side marker??? ) by removing 1 M6 bolt then lifting straight up, unplugging the lamp, and then the plastic cover around the hood latch. I'd get the lower front bolt off of the headlight first, it can be accessed from either top or bottom, I recommend top so you don't have to remove the under cover especially on the passengers side where the washer tank gets in the way. If you have the new headlight handy you can locate the bolt pretty easily. There is sort of a foot on the inside that was covered by the plastic cover around the hood latch, then the one in the back that was previously covered up by the marker portion. The headlight removes by rotating the housing out from under the fender.
If you need halogen headlight assemblies let me know, I just removed mine to install the LED versions last week. They are in very good condition except I cut the plugs off to use on my new lights.