EVDRIVER
Well-known member
- Joined
- Apr 24, 2010
- Messages
- 6,753
JeremyW said:EVDRIVER said:Brusa software can be downloaded online for free.
Sure can, it's on the EV Motork Verks site, although I heard it is a bit clunky. I've heard that the best way is to go ino hyper-term first and establish connection there (it has a nice ASCII menu with the current status and readings) THEN pull up charge star. I have a laptop with a dedicated serial port running Win XP that should work nicely with the project.
Unfortunatly I will be traveling next week and won't be able to play with the charger. I have CAN-do running on my netbook now, just trying to learn the ins and outs of t and plot some values.
It's not as much as it is clunky as it is very difficult to establish communication. Your rig is a good choice, the charger was not exactly set up for consumer programming and is a bit dated in this area. It has not been updated since the first one I did years ago. The charger is well built and reliable and does offer good installation flexibility.