jimmyz80
Well-known member
I just ordered the Schneider Level 2 EVSE model # EV230WS from Home Depot, in preparation for my 2013 Leaf. There's one thing I couldn't discern from the installation manual, that I'll most likely need to know this Thursday when the electrician comes to write up an installation quote. Hopefully someone here can clue me in...
Does this EVSE have knock-outs on the back panel, so the inlet wiring can be completely hidden from view? I know it has knock-outs on the top, but I'd rather not have to pull the wiring out of the wall into a junction box, and then connect the box to the top of the EVSE with flexible conduit. That just seems a lot messier than pulling the wires right out of the wall, through a rear knock-out into the EVSE directly.
Thanks in advance for any help!
Does this EVSE have knock-outs on the back panel, so the inlet wiring can be completely hidden from view? I know it has knock-outs on the top, but I'd rather not have to pull the wiring out of the wall into a junction box, and then connect the box to the top of the EVSE with flexible conduit. That just seems a lot messier than pulling the wires right out of the wall, through a rear knock-out into the EVSE directly.
Thanks in advance for any help!
