My AV EVSE (cash & carry) installation was completed and inspection was completed Jan 6. My electrician installed the feed in-wall, which took extra effort because it had to be routed around a built-in ironing board which is on the other side of the garage wall. The AV unit's mounting plate provides for in-wall rear feed, but this option is designed for the feed to be on the left side of the wall stud. Thanks to mwalsh, I knew about this and like him we were able to drill new holes in the mounting plate so the feed can enter at the right of the stud. This is why the cable support is not lined up with the main unit. My garage sub-panel is visible on the left.
Claremont's permit was $ 62, much lower than what AV assumes. I don't want to quote how low my electrician's price was, but I saved a bundle and I got the install I wanted.
The inspector told me he had just done another AV inspection on 8th St. If these other Leaf folks read this, I would appreciate hearing from you via a PM.
It could be several months before I get my car. If any early Leafers are passing through Claremont on either the I-210 or I-10, I would be glad to give you an hour L2 charge. It would allow me to test the unit. Send me a PM any time.
http://tomnature.smugmug.com/Events/Nis ... 5150_omvGS