Absolutely. Thanks for the tip. I may give it a good lookover if/when I get to that point. Right now I'm still brainstorming of why mod isn't working at 240. Just discussed it with a few fellow engineers here at work and had a few ideas to try before completely de-potting.
drees said:Right - I was only pointing it out in case you hadn't seen it and knew that he already has a DIY EVSE control module in case you wanted to use that as a starting point for your own design or depending on the level of the students give them something to build from if going down the build from scratch route.jwallace3 said:I have read some of it and remember seeing it a while back. It's all just for the heck of it. I know this thread got out of control quick, but I did mention early on I'm mentoring 2 EE seniors in their senior project, which is to design a portable L1/L2 ESVE so I will probably do it even if I get the mod to work, just so I am forced to go over the standard with a fine tooth comb and be able to help the students define their specifications and solidify their design.