EVDRIVER
Well-known member
- Joined
- Apr 24, 2010
- Messages
- 6,753
EVNation said:EVDRIVER said:EVNation said:Like others, I just got a note that they reassessed. In my case, I have a Mini-E charger so am all wired right to the spot so just need the box and swap the junction wire. As easy as it gets. My reassess took off ~$300 down to $1040 labor. That seems in line with what others saw on the reassess.
So I assume they are across the board dropping some of the labor charge. Not really a response to my particular setup. I am still passing and going with another provider and let them know that.
If you have a MINIe charger you can buy a J cord and use what is on your wall. Even if you decide to not use the one you have (not sure why as it's better) you can buy one and screw it on for free.
Not clear we will be able to buy the J cord directly. I would think that should be possible but often the make stuff like that not available. You have any sources? Many people tried to get the raw cables for the Mini-E and Tesla and failed (though those were not standards). It sounds like Clipper Creek will be rolling out an upgrade plan so I am waiting for that. But as you say will possibly just buy a new box and do it myself.
The cords wil be available as they will be very common, the inlets are available now. Do you want to sell your box, it is very good quality and higher power. I can't imagine nit using it as it's perfectly fine.