DJiK
Member
Add a lock to your standard OEM EVSE.
1. Take the EVSE apart. See GlennD's instructions. Pliers work just as well as a hammer.
2. Disconnect cord leading to J1772 plug:
3. Run cord through your chain or cable.
4. Reconnect and put everything together in reverse order.
5. Add a lock and attach the key to your keychain.
1. Take the EVSE apart. See GlennD's instructions. Pliers work just as well as a hammer.
2. Disconnect cord leading to J1772 plug:
- Remove four screws that hold the wires
- Two screws that lock the cord in place.
- Two more screws that hold the rubber grommet.
3. Run cord through your chain or cable.
4. Reconnect and put everything together in reverse order.
5. Add a lock and attach the key to your keychain.