hi I am from asia,
LEAF car year is 2012 last
i make project (DIY) range extender for my leaf car, using 18650 li-ion batteries. but i faced some problem with LEAF car. is that problem is leaf there car remaining Range (km/Miles) over (3 side strips on range remaining dash) time voltage is (from leaf spy) "365V" one li-ion cell voltage is 3.8V ( 365/96 = 3.8) .
the after we can drive for charging, but i drive car end of turtle "mode" ( car is totally battery lost) that time i check with my leaf spy app the car voltage, after car stop voltage is "355V" one li-ion cell voltage is 3.7V ... now have a problem, 18650 cell nominal voltage is 3.7V .. the low voltage is 3.1V or 3.2V. have a power of cell 4.2 v to 3.2V i can use that battery cell to 3.2V low volt but LEAF HV battery cutoff the main battery one cell voltage is 3.7V .. that my question is how configuration nissan LEAF main battery low voltage cutoff move down from program. If the program how to change with any diagnosis tool or any program tool ?? pleas help guys its most important to me for DIY project
thanks!!!
LEAF car year is 2012 last
i make project (DIY) range extender for my leaf car, using 18650 li-ion batteries. but i faced some problem with LEAF car. is that problem is leaf there car remaining Range (km/Miles) over (3 side strips on range remaining dash) time voltage is (from leaf spy) "365V" one li-ion cell voltage is 3.8V ( 365/96 = 3.8) .
the after we can drive for charging, but i drive car end of turtle "mode" ( car is totally battery lost) that time i check with my leaf spy app the car voltage, after car stop voltage is "355V" one li-ion cell voltage is 3.7V ... now have a problem, 18650 cell nominal voltage is 3.7V .. the low voltage is 3.1V or 3.2V. have a power of cell 4.2 v to 3.2V i can use that battery cell to 3.2V low volt but LEAF HV battery cutoff the main battery one cell voltage is 3.7V .. that my question is how configuration nissan LEAF main battery low voltage cutoff move down from program. If the program how to change with any diagnosis tool or any program tool ?? pleas help guys its most important to me for DIY project
thanks!!!