Nothing has changed. Perhaps you have selected the "Use temperature to adjust DTE" in which case the variable Wh/Gid is not used. Uncheck that option and DTE will use the Wh/Gid you have selected. The "Use temp.." calculation has always used a fixed Wh/Gid of 76.642336 per Tony Williams' formula.LeafSwe said:Battery settings Wh/Gids used to change DTE. In the new version it only changes remian kwh. Bug?
I noticed it just after i installed when i tested 70wh/gid config.
It just happened out of the blue. I had a web browser (Dolphin) and who-knows-what-else running on the phone at the time. Next time I QC I'll try to reproduce it.Turbo3 said:If this happens again I can upload a test version with the change for you to try if you are in the test group.
Turbo3 said:Nothing has changed. Perhaps you have selected the "Use temperature to adjust DTE" in which case the variable Wh/Gid is not used. Uncheck that option and DTE will use the Wh/Gid you have selected. The "Use temp.." calculation has always used a fixed Wh/Gid of 76.642336 per Tony Williams' formula.LeafSwe said:Battery settings Wh/Gids used to change DTE. In the new version it only changes remian kwh. Bug?
I noticed it just after i installed when i tested 70wh/gid config.
The "fix" will be in the next release as there is no reason to update a screen that can't be seen. That is already done when you view the Help file.DaveInAvl said:It just happened out of the blue. I had a web browser (Dolphin) and who-knows-what-else running on the phone at the time. Next time I QC I'll try to reproduce it.Turbo3 said:If this happens again I can upload a test version with the change for you to try if you are in the test group.
If there's a way to lighten the memory footprint without affecting operation, that seems like good practice in any case. I'm in the test group. Thanks again for all the work you're putting into this!
After you open the trip log do a single tap and it will take you to the bottom. Only works the first time the trip log is opened or after you change screen orientation.jlv said:Minor feature request: when I view the trip log, it would be nice if it started showing the most recent trip rather than the oldest trip. (either by positioning at the bottom of the spreadsheet or by reversing the order in the spreadsheet).
Minor question: the trip log contains three columns: energy, drive, regen. Drive/Regen is the energy used / energy recovered, as displayed on screen 4 under the energy panel. ('used' is really 'net used': the amount used - amount regen). However, what is the energy column? It is either identical to 'drive' or it is the last two drive values added together.
You should be able to install 0.36.69 now and give it a test. I assume you are already in the test group. If not send me the email address used to purchase LeafSpy Pro.DaveInAvl said:Thanks! Look forward to testing it. The crashes I submitted several days ago were induced by playing a video full-screen in the browser, then home-buttoning back to the home screen (which paused the video playback) and reentering Leaf Spy. Figured that'd be a stress on system RAM.
Was this bad state Bluetooth or WiFi adapters, or both?Turbo3 said:...
- Added recovery code to handle the case when the OBDII adapter gets into a bad state. This should fix the problem of having to unplug then plug back in the OBDII adapter in order to get LeafSpy Pro working again.
...
I have seen it on BT but it could also happen on WiFi.TimLee said:Was this bad state Bluetooth or WiFi adapters, or both?Turbo3 said:...
- Added recovery code to handle the case when the OBDII adapter gets into a bad state. This should fix the problem of having to unplug then plug back in the OBDII adapter in order to get LeafSpy Pro working again.
...
I have Bluetooth and at times went three months with Kitcat and never had to unplug it.
But past week with Lollipop it has hung bad twice.
Unplugging did not work easily.
Had to clear the adapter from the phone, re-pair with phone, and then unplug adapter couple times to get it working.
Hopefully new test version fixes that.
I tried to crash the new test version this morning, using the method which crashed the previous version repeatedly, and couldn'tTurbo3 said:Let me know as soon as possible if it fixes the problem so I can release it to everyone.
That is good news.DaveInAvl said:I tried to crash the new test version this morning, using the method which crashed the previous version repeatedly, and couldn'tTurbo3 said:Let me know as soon as possible if it fixes the problem so I can release it to everyone.
Probably not as it lists v2.1 which seems to be code for a lower version where they have removed the PIC processor and dropped Leaf required commands. This is a case where a higher version means less function but it probably increases sales of their inferior product.jms said:What's the current hardware requirement for android (galaxy note II)? would this one work?
http://www.ebay.com/itm/Mini-ELM327-V1-5-OBD2-II-Bluetooth-Car-Auto-Diagnostic-Interface-Scanner-Tool-/300870978320?pt=LH_DefaultDomain_0&hash=item460d4ecb10&rmvSB=true" onclick="window.open(this.href);return false;
Thanks
What about this one as it has two day shipping if you have Prime.jms said:so this or
http://www.ebay.com/itm/KONNWEI-KW902-ODB-II-Bluetooth-Wifi-Scanner-Detector-Auto-Diagnostic-Tools-/121501151085" onclick="window.open(this.href);return false;
this
http://www.amazon.com/CHEERLINK%C2%AE-KONNWEI-Bluetooth-Wireless-Diagnostic/product-reviews/B00Q5YRC56/" onclick="window.open(this.href);return false;
Turbo3 said:What about this one as it has two day shipping if you have Prime.
http://www.amazon.com/Green-ELM327-...pebp=1435169076469&perid=17V1N228BKGT3Y1ZRFXD
Enter your email address to join: