garygid
Well-known member
Part 145802 at http://www.obd2cables.com" onclick="window.open(this.href);return false;
is a short splitter cable, about $19.
is a short splitter cable, about $19.
garygid said:Part 145802 at http://www.obd2cables.com" onclick="window.open(this.href);return false;
is a short splitter cable, about $19.
Ingineer said:Why would you want both a Gid meter and Leafscan? The Leafscan shows all the same data available on Gary's meter, and is likely more visible in sunlight.
TonyWilliams said:Well, I already have it. Maybe I'll retire it when my very own LEAFscan arrives.Ingineer said:Why would you want both a Gid meter and Leafscan? The Leafscan shows all the same data available on Gary's meter, and is likely more visible in sunlight.
Phil,Ingineer said:Boomer23 said:Beautifully done, Phil, congratulations.
(Also looking for someone to assist with injection molding case design, die creation, and a decent production molding shop)
-Phil
SparkyEV said:I'm in, and I'm happy to pay a deposit. Thanks for putting this together!
garygid said:The Pack Volts and Amps (that the SOC-Meter displays) are taken from CAN bus messages that seem to have values available at half-volt and half-amp resolution (not sure what accuracy). The SOC-Meter averages 20 readings to cut down the noise and estimate one decimal place. It then multiplies the two derived values to get "instantaneous" Power (energy usage rate), which it also displays.
GroundLoop said:I want one! Name your price.
I don't know how Kickstarter works on the vendor end, but others have used it with success to gauge interest and pre-fund manufacturing. Maybe it's a fit here.
Phil already runs a business. He doesn't need anything like Kickstarter.spleenster said:I would agree - this seems a perfect fit for Kickstarter.
I hate to take this off topic but while Phil may not need crowd funding for raising capitol or gauging interest it has nothing to do with already running a business.garsh said:Phil already runs a business. He doesn't need anything like Kickstarter.
Enter your email address to join: