I do not think I am over reacting. History has shown the EVSE works even though the voltage is completely out of spec. The original relay was the PB 30A relay with a 30A set of contacts. That relay has a 80 ohm coil and it will force the voltage well above the logic max. CMOS is not TTL and it works fine out of spec but it is not right. I do not have any data of the total coil resistance of the PB single pole relays Chris favors in pairs.
I will either use Barbouri's board with a proper regulator or add one to the plus boards. Just because it works out of its specifications does not make the design right.
I will either use Barbouri's board with a proper regulator or add one to the plus boards. Just because it works out of its specifications does not make the design right.