Yah, at least once or twice a week. Mine just crashed (502 error) again yesterday. Just working up to starting a new support ticket. They've got problems.bowthom said:Hello Blinkers,
My charger seems to lock up every couple of days. Today I touched the screen to wake it and it said "processing" with a spinning ? mark. I left it for 4 hours to see if it would clear but no luck until I power cycled it.
Anyone else crashing this often?
davewill said:Mine just crashed (502 error) again yesterday. Just working up to starting a new support ticket. They've got problems.
But, I want the recorded data, too.LEAFfan said:They told me the fix for the '502' system error should be in the next update. I can still charge okay with it on the screen, but it just doesn't record the data from the charge. Most of the time, it disappears on its own. I don't unplug it. If they don't get the data, that's their problem.
Just mod your stock EVSE. Then get an adapter and you can plug it into the 6-50R that was installed for your Blink.davekern said:I am ready to get a different unit on my own.
drees said:Just mod your stock EVSE. Then get an adapter and you can plug it into the 6-50R that was installed for your Blink.davekern said:I am ready to get a different unit on my own.
http://evseupgrade.com/davekern said:drees said:Just mod your stock EVSE. Then get an adapter and you can plug it into the 6-50R that was installed for your Blink.davekern said:I am ready to get a different unit on my own.
I read earlier about this but it was early on. What is the latest for mods, who, cost etc.? Can you point me in the right direction. I am ready. Great idea. Just modify it and use it instead of Blink until they get their act together.
Rat said:I've been using Level 1 so far since I don't have the Blink unit yet. Considering all the problems I keep reading about, I'm in no rush. Let them fix as much as they can before they install mine. It'll be free since it's EV Project and I was planning to go L1 before getting accepted into that anyway, so I can do without. The only real issue is when I run the charge down to 1 bar (done only once so far) and want to charge back up during off-peak hours. I can't do that with Level 1, so there is some cost.
I had similar problems and after they replaced it with a new SD card, everything seems to work much better now. I haven't had to do a reboot for a few weeks now, since.bowthom said:Update,
My blink has been continually crashing in one of three ways.
1. Spinning "?" and "processing" frozen and wont charge.
2. Orange "cannot process your request" screen but still charges.
3. Crash every 3rd day but reboots itself and continues to charge.