AdventureMuffin
Active member
- Joined
- Oct 29, 2016
- Messages
- 27
Curious if someone knows the solution to the problem of half of my screen not sensing my touch. I went into system diagnosis menu, then calibration, but it is not sensing the two + on the right screen, so I am not able to finish the calibration. Screen seems to want to have all 6 + touched.
Thoughts appreciated
David
ps if you are curious on how to get into System diagnosis menu, follow these steps.
1. Start the car.
2. Set the radio to FM.
3. Press MAP 3 times, Audio Power twice, and MAP one more time. This should open the System Diagnostic Menu.
4. Tap Confirmation/Adjustment.
5. Tap Display Diagnosis.
6. Tap Touch Panel.
7. Tap Touch Panel Calibration.
8. Follow the onscreen instructions to recalibrate the four corners.
Thoughts appreciated
David
ps if you are curious on how to get into System diagnosis menu, follow these steps.
1. Start the car.
2. Set the radio to FM.
3. Press MAP 3 times, Audio Power twice, and MAP one more time. This should open the System Diagnostic Menu.
4. Tap Confirmation/Adjustment.
5. Tap Display Diagnosis.
6. Tap Touch Panel.
7. Tap Touch Panel Calibration.
8. Follow the onscreen instructions to recalibrate the four corners.