Source?Marktm wrote:Appears that manufacturers of V2G equipment state that bi-directional DC current (via CHAdeMO) can only be obtained in 2014 Leafs and after....
I was looking into the V2H offering from Setec Power (China). I went back to the original statement from them - that the 2013 and after Leaf that will work with their 3kw "home" unit via the CHAdeMO connection - but not the 2011/2012.edatoakrun wrote:Source?Marktm wrote:Appears that manufacturers of V2G equipment state that bi-directional DC current (via CHAdeMO) can only be obtained in 2014 Leafs and after....
Nissan has been demonstrating using the LEAF as a (CHAdeMO accessable) power source since ~2011, IIRC.
What is the power output rating of the extra unit you have? I assume 220V, 50 Hz (or would it be 240V, 60 Hz?) so it would probably work for 240V appliances that are not frequency dependent, but how many watts?russellv wrote:Regarding the Setec Power V2H system, I accidentally bought two. Apparently I'm not clever enough to use Alibaba.com correctly. Anyone have interest in buying my second one? Around $3K with shipping. It is only 220V AC output though, so can only handle universal charging devices (most phones and laptops). Don't expect to be able to plug in your fridge.
But so far the first one works well.
Also, I can verify that only MY2013 and newer works with V2H in US/EU markets.
An autotransformer will produce split 120V/240V from 240VAC. I have a couple rated for 4500 VA which would work fine in this application. Then you could run any household device up to your output rating.russellv wrote:Regarding the Setec Power V2H system, I accidentally bought two. Apparently I'm not clever enough to use Alibaba.com correctly. Anyone have interest in buying my second one? Around $3K with shipping. It is only 220V AC output though, so can only handle universal charging devices (most phones and laptops). Don't expect to be able to plug in your fridge.
Good news!russellv wrote:But so far the first one works well.
That counts me out.russellv wrote:Also, I can verify that only MY2013 and newer works with V2H in US/EU markets.
Is it possible to upgrade firmware/software/CAN protocols so that the 2011/2012 models are CHAdeMO compliant with bi-directional energy flow? If not, is there hardware replacments that can accomplish this?RegGuheert wrote:That counts me out.russellv wrote:Also, I can verify that only MY2013 and newer works with V2H in US/EU markets.