i have an LELink from http://www.outdoor-apps.com, purchased maybe a year ago. it has a solid white case.
LeafSpy Pro can apparently see the device, but i get the "Wait 4 ELM 0/1" message forever. logging the ELM yielded this:
ad inifinitum.
i assume this means that somehow this adapter is not compatible? i was reading another thread that says some of the newer ones merged the bluetooth into the PIC and do not support all the commands, but i would have expected leafspy to tell me that if this adapter was incompatible. also this casts some doubt on which one i should buy if this particular module is not supported. is there a known good one on amazon as of 1/2016?
thanks,
rob
LeafSpy Pro can apparently see the device, but i get the "Wait 4 ELM 0/1" message forever. logging the ELM yielded this:
Code:
Leaf Spy Pro 1.2.5 0 9.2 en
0A 1 0 965 963 : [00 00] 004 ATE1
0A 1 0 985 982 : [00 00] 002 OK
0A 1 0 996 993 : [00 00] 001 >
0A 1 0 1075 72 : [01 00] 003 ATZ
0A 1 0 1856 853 : [01 00] 011 TDA61_V2.43
0A 1 0 1896 893 : [00 00] 001 >
0A 1 0 1965 60 : [01 00] 003 ATZ
0A 1 0 2756 851 : [01 00] 011 TDA61_V2.43
0A 1 0 2794 889 : [00 00] 001 >
0A 1 0 2845 42 : [01 00] 003 ATZ
0A 1 0 3627 825 : [01 00] 011 TDA61_V2.43
0A 1 0 3670 867 : [00 00] 001 >
0A 1 0 3746 69 : [01 00] 003 ATZ
ad inifinitum.
i assume this means that somehow this adapter is not compatible? i was reading another thread that says some of the newer ones merged the bluetooth into the PIC and do not support all the commands, but i would have expected leafspy to tell me that if this adapter was incompatible. also this casts some doubt on which one i should buy if this particular module is not supported. is there a known good one on amazon as of 1/2016?
thanks,
rob