BillAinCT
Well-known member
I went to DCFC just now and the EVSE (EVgo I've used before) said Problem with Charger. I tried both stations. I had my Wifi OBD2 and it's reading U1027 2408 Charger. I'm not finding much about these codes. I read removing the 12V battery and trying again might work but I don't have tools.
The first time I plugged in the CHAdeMO connector, I heard the normal clicking. But no blue lights and EVgo threw the error. And no clicking thereafter inserting the CHAdeMO.
Dilemma: I have enough miles to get to the closest Nissan dealer or to get home. But I can't go home to test and try the 12V disconnect and still make it to the dealer (just my luck).
I'm leaning toward just going to the dealer. But do these charger faults happen that often? Will clearing it fix it?
I cannot clear the codes at the EVSE because LeafSpy Pro (iOS) doesn't finishing reading the codes. It hangs and it doesn't let the Clear DTC codes button function. My BT OBD2 is home where I could try to clear this code and see if I can recover.
Any ideas? Thanks!
The first time I plugged in the CHAdeMO connector, I heard the normal clicking. But no blue lights and EVgo threw the error. And no clicking thereafter inserting the CHAdeMO.
Dilemma: I have enough miles to get to the closest Nissan dealer or to get home. But I can't go home to test and try the 12V disconnect and still make it to the dealer (just my luck).
I'm leaning toward just going to the dealer. But do these charger faults happen that often? Will clearing it fix it?
I cannot clear the codes at the EVSE because LeafSpy Pro (iOS) doesn't finishing reading the codes. It hangs and it doesn't let the Clear DTC codes button function. My BT OBD2 is home where I could try to clear this code and see if I can recover.
Any ideas? Thanks!