Without the distractions of the MNL forum yesterday, I managed to get my unit just about finished. I say "just about" because I actually don't have my relays yet (they are supposed to be here next week). So the test run you see here is done with the utmost care on my part, and with particular attention to avoiding extraneous unplugging from the outlets I would use by others.
I used (more or less) the same specs as pi100, though you can see I went with 18" stubbies cut from the receptacle end of my new extension cord. I then added a new receptacle to the remainder, giving me a 22' extension cord to keep with the unit. I figured I never would be more than a foot from at least one of the sockets I'd be combining, what with the adequately long J1772 cord on the EVSE.
I used (more or less) the same specs as pi100, though you can see I went with 18" stubbies cut from the receptacle end of my new extension cord. I then added a new receptacle to the remainder, giving me a 22' extension cord to keep with the unit. I figured I never would be more than a foot from at least one of the sockets I'd be combining, what with the adequately long J1772 cord on the EVSE.